Best EnGenius Computer Networking Wireless Access Points


EnGenius Computer Networking Wireless Access Points

There are several different types of EnGenius Computer Networking Wireless Access point available, so it's important to choose the right one for your network. In this article, I will discuss the different types, including the EnGenius ECW230, ENH500, LAPAC1750C, and EnTurbo EAP1250. I will also explain the differences between each one.

EnGenius ECW230

The EnGenius ECW230 is a business-class Wi-Fi access point. It works with an 8-port Gigabit POE switch from EnGenious Cloud, which you can purchase separately for $350. The switch provides excellent coverage and reliability. For this reason, you should consider purchasing it for your network. However, if you're looking for an inexpensive access point, look elsewhere.

The EnGenius ECW230 is not as expensive as some other models, but it's still very affordable for an entry-level wireless access point. The ECW230 is compatible with both dual-band and single-band networks. It also comes with mounting brackets and a Kensington slot for easy access and management. It is easy to set up and manage, and its customizable features make it an excellent choice for small businesses.

The EnGenius ECW230 is a high-quality indoor wireless access point with the most common WiFi 6 features. Targeted wake time for IoT devices and MU-MIMO (4x4) are also included. This is the only EnGenius ECW230 access point that has a 2.5Gb PoE port, which should play well with WiFi 6. However, it's worth noting that the ECW230 is intended for SMBs and not consumers.

EnGenius ENH500

The ENH500 Computer Networking Wireless Access Point is a network adapter that supports two-way wireless communication. The device has two-way wireless capability and supports multiple networks. The ENH500 supports four different operating modes. To use a different mode, you must first configure the device's TCP/IP settings. These settings include the IP address, Subnet Mask, Default Gateway, and WAN port IP address.

The ENH500 Wireless Outdoor CPE is equipped with a 13dBi antenna for high-quality wireless signal reception. The device also features high-power output and reduced dead spots. Its integrated WDS and PoE technology provides users with more flexibility in building wireless networks. It also features four LEDs on the side, allowing users to monitor its status and find problems more easily.

The EnGenius ENH500 Computer NetworkING Wireless Access Points are easy to set up. The devices come with a small plastic protrusion that contains an LED light that indicates the status of the system. An illuminated white light indicates that the device is in the initializing stage. A blue light indicates that it is busy finding other APs. A solid blue light means that the device is already integrated into the network.

In addition to the status of the network, the EnGenius ENH500 also offers an intuitive user interface. The main screen contains several different tabs, including Device Information, Wireless Settings, Radio Status, and LAN and WAN information. The Monitor sub-section allows you to view live statistics on throughput rate, interfaces, and routes. The main page also shows the ARP table.

EnGenius LAPAC1750C

The LAPAC1750C is a WiFi access point that is compatible with the Linksys environment. You can pair it with a Cloud controller by adding its MAC address and serial number, which are located on the bottom of the device. Once the device is connected, you can use it offline or pair it with another AP. To set it up, you must go to the Cloud controller's Access Points section and pair it with the Cloud controller.

The recessed Reset button enables you to reset the AP to its default settings. To do so, hold it for five seconds. Further to the right, you will find the Power port. There is also a single 2.5GbE port for connecting to a router. PoE is also supported, so you can connect it to your network using one of these two ports.

Another important feature of this model is its multiband functionality. You can use the dual band feature to get higher speeds when using it outdoors. It supports 1,300 Mbps in the 5 GHz band, and up to 450 Mbps on the 2.4 GHz band. The dual band feature, Band Steering, helps your business take advantage of the less-crowded 5 GHz band.

EnGenius EnTurbo EAP1250

You can configure and monitor your EnGenius EnTurbo eAP1250 computer networking wireless access points using the ezMaster cloud-based configuration service, hosted on Amazon Web Services. ezMaster lets you see the status of your routers and switches, set custom IP addresses, and monitor network traffic across multiple devices. If you want to configure a mesh network, you can do so under Device Management.

The EnGenius EnTurbo eAP1250 is easy to install and configure, thanks to its compact design and LED status indicator. It measures just 5.2 inches in diameter and measures less than an inch and a half thick. It weighs 9.88 ounces and comes with a small bracket for ceiling mounting. Alternatively, you can put it on a desk and configure it manually. Despite the compact size, it is not ideal for enterprise use, but it is capable of providing adequate coverage in most environments.

The EAP1250 supports the latest multi-capability devices, including HD video streaming. Moreover, it offers optimum performance and reliability by leveraging advanced 11ac Wave 2 Wi-Fi technology. It also features a smart meter that allows you to monitor and track the usage of data in the network. This helps you decide whether you really need to purchase another eAP1250 or upgrade your current one.

EnGenius LAPAC1750C with centralized management system

The EnGenius LAPAC1750C comes with a centralized management system for computer networking and has two recessed mounting areas. The AP comes with a Gigabit Ethernet port and a 12V DC-In Power connector. It also has a Reset button that needs to be held for 5 seconds to return it to factory defaults. It also comes with a single 2.5GbE port for connection to your router. It is PoE compatible.

The centralized management system allows you to monitor and manage all devices on your network. You can set up unlimited networks using the same software, and each AP will be able to share centralized management information. The centralized management system supports all types of devices, from a single PC to a network of thousands of laptops. The cloud platform is easy to use, with a Captive Portal, Splash Page, and various authentication types. You can even manage your wireless network from your smartphone or tablet!

Once you have configured the network, you can monitor its performance and check for potential problems. The Monitor gives you an overview of all adopted APs. Click on an AP to see more information, including how many devices are online, if any are currently experiencing heavy loading, and more. You can manage your AP using an app and an integrated cloud controller. The cloud controller is licensed, so it is not available for free.

EnGenius LAPAC1750C with PoE injector

The EnGenius LAPAC1750C is an excellent PoE-compatible computer networking wireless access point. It features a recessed Reset button and has two ports for power and Ethernet. Its LED status indicator is recessed and can be used to check if it is working properly. It also has a PoE-compatible 2.5GbE port for connection to a router.

It is easy to install and manage the LAPAC1750C. You can also choose to install it in an offline mode to simplify installation. If you prefer, you can also configure the AP to adopt the configuration of other access points. For faster deployment, you can buy a preconfigured device. It is compatible with the Linksys Cloud Controller. The EnGenius LAPAC1750C is compatible with both on-premises and cloud management.

The LAPAC1750C is slightly bigger than the Ubiquiti UAP-AC-PRO. It weighs about a pound and is meant to be mounted on a ceiling or wall. The mounting kit contains screws and a drill layout template, as well as four small round silicone feet. You can also use the included software to install and configure the LAPAC1750C.

The EnGenius LAPAC1750C features a built-in wireless intrusion detection system that audits all APs in the network on a regular basis. It also checks to see if all APs are properly connected to the secured network. A wireless access point with beamforming technology allows it to focus its signal toward clients, minimizing waste of data.


Jorge Prens

Highly Effective Principal Network Architect who recognizes new business opportunities and has the experience, leadership skill to capitalize on customer challenges. Report to the VP of Professional Services and accountable for Architecting and delivering network solutions at an enterprise level. Provide guidance, design, planning, implementation, and operation of new and existing network infrastructure and security projects. Uniquely qualified to produce measurable results in both emerging business and established organizations.

­čôžEmail | ­čôśLinkedIn