Best NETGEAR Computer Networking Transceivers in 2022

Benefits of NETGEAR Computer Networking Transceivers

There are many benefits of NETGEAR Computer Networking Transceivers. For the least amount of money, these high-performance devices can connect multiple computer networks to the same LAN switch. Depending on your needs, you can choose a Gigabit Ethernet, 10GBASE-T, or 10GBASE-X transceiver. To maximize the benefits of these products, you can buy them at a discount from Amazon.

NETGEAR's AGM731F 1000Base-SX 550M SFP Transceiver module

The AGM731F 1000Base SX 550M SFP Transceivers from NETGEAR come in a variety of configurations, including duplex LC connector and single-mode fiber. The modules come with low power dissipation and are RoHS-compliant. AGM731F has a 550-meter reach and is 100% TAA-compliant.

The AGM731F is Hummingbird Networks-compatible, adding support for 1000Base-SX Gigabit Ethernet. This transceiver module features hot-swappability and is manufactured by a top-tier factory. This device also comes with a limited lifetime warranty and is available in stock.

NETGEAR's AGM734 compatible SFP transceiver module

The NETGEAR(R) AGM734 compatible SFP transceivever module provides 1000Base-TX throughput up to 100m and a RJ-45 connector. It can be configured to meet your needs and has been extensively tested for performance and data traffic. This transceiver module meets or exceeds Netgear specifications and is manufactured to meet or exceed MSA standards.

The AGM734-10000S transceiver module is compatible with a broad range of networking products, including Cisco(r) and HP(r) networking equipment. This cost-effective transceiver module is fully compatible with MSA compliant network equipment and provides a 1000M data rate over distances up to 100m. Additionally, it is built to meet MSA standards and can be hot-plugged without interruption of network traffic.


NETGEAR's AGM734, a compatible 1000Base-T SFP transceiver, provides a high-speed 10/100/1000Base-T connection up to 100m. It supports Auto-negotiation and MSA standards and is Trade Agreements Act (TAA) compliant. Its low-profile design fits seamlessly into most desktops and laptops.

It's a high-quality USB 2.0 device with a black oxide finish that resists corrosion and extends the life of the bit. Its sleek, glossy design enables you to attach cables and wires without worry of tangling or losing them. And it comes with a lifetime warranty. And you can't beat the price: $80. This is a bargain for the money!


Compatible with NETGEAR network equipment, NETGEAR's AGM731/F computer networking transceiver operates at 850 nm over multi-mode fiber, enabling users to extend Gigabit Ethernet ports to fiber networks. Compatible with OEM and third-party transceivers, SFPs operate identically, meeting Netgear's specifications and Multi-Source Agreement standards.

Compatible with NETGEAR's AGM731/F Computer Networking Transceivers, these spooled-fiber-pigtails support 1000Base-SX Gigabit Ethernet and are hot-swappable. Hummingbird's SFP-compatible AGM731F transceivers feature the same casing and are guaranteed to work with your hardware. Additionally, they carry a limited lifetime warranty.

NETGEAR's AGM731/F 1000Base-SX 550M SFP transceiver module features low power dissipation, metal enclosure, and dual-rate fiber. Featuring an 850 nm VCSEL laser transmitter, this transceiver is RoHS-compliant and features a 5,125mm MMF.

The official NETGEAR AGM731F 1000Base-SX computer networking transceiver sells for well over $400. By comparison, Hummingbird's AGM731F 1000Base-SX transceiver sells for around a tenth of that price. Name-brand markup on SFP transceivers is huge, and many buyers assume they must buy from the OEM.


NETGEAR's AGM732, AGM732F, and AGM733F Computer Networking Transceivers are two of the leading brands of transceivers. These devices offer a variety of networking solutions, including phoneline, powerline, and Ethernet networking devices. NETGEAR offers the highest levels of security and privacy, and can be used with nine-um single-mode cabling.

The NETGEAR AGM732F Computer Networking Transmitter is a hot-plug, 3.3V SFP transceiver module for Gigabit Ethernet applications. It supports SFP multisource agreement (SFP) technology and is RoHS-compliant. The AGM732F is an SFP transceiver that has been tested to meet MSA standards.

Ivan Cordoba

Software Engineer experienced in Front End, Back End, and Full Stack technologies. I love playing video games and coding. Video games are great because every single one has different mechanics that you then apply to solve a problem whether it’s solving a puzzle, defeating a boss, or using teamwork to defeat enemies online. I like to approach Software Engineering in a similar way, I have many tools and technologies at my disposal and every project or problem is an opportunity to utilize these in the most optimal way possible to get to a solution. My favorite part of the Software Engineering industry is that there are always new technologies to master and I’m glad to be a part of it. I am experienced in HTML, CSS, React, Redux, Backbone, Angular.js, and Javascript to design and build efficient Front End interfaces. I also have experience with Express, Node.js, PHP, Postgres, CouchDB, MongoDB, and MySQL to build out Back-End Systems. I also have experience deploying to Heroku as well as AWS using raw EC2 instances and Docker. I'm always available to talk and I look forward to hearing from you.

📧Email | 📘 LinkedIn