Tupavco Repeaters - Ethernet Extender
Tupavco Repeaters are easy to install and use, especially if you have a Wi-Fi network. They come as a set of sender and receiver. There are two different models of repeaters: CPE (RT) and CO. This means that they can be used by both CPEs and COs. The Ethernet Extender TEX-100 kit is a pair of sender and receiver that are Plug-And-Play ready.
TEX-100 Ethernet LAN extender
The Tupavco TEX 100 Ethernet LAN extender is a versatile device with a multitude of uses. It can be used as a standalone Ethernet bridge or as part of a DSLAM. This device features a set of three LED indicators to indicate power, CPE (RT) mode, trained link, and active link. Its Plug and Play design allows users to quickly install and use it, even if they are unfamiliar with networking.
The TEX-100 Ethernet LAN extenders utilize second-generation VDSL technology to deliver aggregate VDSL line rates of 100/100 Mbps. The device has an incredibly low latency of 250 ms and offers 30a or 17a profile options for maximum communication protection. Additionally, its full-duplex data-line rate of 100 Mbps provides near-fiber performance for bandwidth-intensive applications. However, performance varies depending on distance and the condition of the wire.
The Tupavco TEX 100 Ethernet LAN extender is a high-speed device that has one VDSL port and one Ethernet port. Its technology uses bridge modems that are compatible with the VDSL2 standard and can extend Ethernet service over a single pair of copper cables. Its range is up to 7000 feet. When used as an Ethernet repeater, it can be used in point-to-point connections.
TEX-100 Ethernet LAN extender kit
If you're planning to install an Ethernet network in a new location, the TEX-100 VDSL2 Ethernet LAN extender kit is the perfect solution. This device extends the range of a standard CAT5 or CAT6 cable up to 328 feet. Its plug-and-play design makes it easy to install. It also features a receiver unit.
The TEX-100 Ethernet LAN extenders are compatible with most DSLAMs, and can work as a standalone device. They come with an internal power supply that allows multiple units to be installed in a rack-mount chassis bay. You can replace the extenders individually as needed. The unit also features a fan for added cooling. The TEX-100 Ethernet LAN extender kit includes a quick installation guide and an instructional manual.
The TEX-100 Ethernet LAN extenders have a symmetrical 100Mbps data rate. This translates into a 100Mbps data rate when used as an Ethernet bridge. The TEX-100 uses second-generation VDSL technology for an Ethernet connection. It can deliver an aggregate VDSL line rate of 100/100 Mbps and offers communication protection up to 250ms impulse. Furthermore, the TEX-100 can deliver a latency of 660ms, 770ms, and 11821474 ms, which is equivalent to near-fiber performance. Although the advertised performance is impressive, it should be noted that actual performance may vary due to factors such as distance, AWG gauge, and wire condition.